Studio Techniques: Gain Staging

pt meter

First off, what is gain staging and why is it important?

Gain staging is the process of managing the levels of incoming audio signals to eliminate noise and prevent distortions or signal clipping as much as possible.

How do I address gain staging in my recordings?

Historically, in the days of analog recording, engineers would try to find a “sweet spot” at which the incoming audio signal was significantly above the ordinary analog noise floor but yet would fall just shy of clipping the audio signal during the loudest parts of the performance.  This spot was often around the 0 db zone.  This would result in tracks that were as hot as possible without clipping.

However, with the advent of digital recording, the recording noise floor has dropped to next to nothing – and the gain stage needed to change with it, too.  Digital recording not only allows for, but basically requires, a far more conservative approach to recording levels.

This technique creates good-quality recordings with, by default, low background noise, and plenty of headroom on the meter.  Often, plugins used during the mixing and mastering phases of recording will use some of that headroom, so if your initial performance was done at too high a level, the addition of plugins can easily push your performance into the dreaded “too hot” zone.  The quality of your sound will suffer.  Far better to record at a conservative level and make a track louder, if necessary, during the mastering stage than to have to over-compress and squash the life out of a good performance that was recorded at too high a level.

For digital recording, the “sweet spot” tends to be around -18 dB.

Proper gain staging also helps in the mixing phase of recording – in general, mixes turn out better when tracks are at low levels on the faders.  If a mix is too quiet for you to adequately hear it, don’t turn up the faders on the board – turn up your monitors!

After recording, mixing, and ensuring that no signal-clipping has occurred in any track, bus all channels through a stereo master fader.  This fader represents an aggregate of all signals being bussed to it from other channels, so it may very well be the case that it will have a very high signal, or may even clip.  If this is the case, group all audio channels and turn them down as a collective unit until the master fader is at about -10 db.  It should not be approaching the -3 db mark – don’t just turn down the master fader!  This only masks the symptom of the issue without resolving the issue itself.

I hope this helps with your next mix. Good luck!

Advertisements

Free Eventide Plugin

10306753_10152507360698746_3643555078641183689_n

 

Hey, Wolf pack!  Get your Free plug-in! Now through July 8,

 

Wolf’s Den Music loves to help fellow engineers and musicians get new gear and software whenever possible. Especially when it’s FREE.

Eventide is giving away their UltraChannel plug-in for FREE – a $249 value! Head over to Eventide.com and use the access code 0C4BA949 to claim your free plug-in. Share this post with your engineer friends – Like our Wolf’s Den page here on WordPress and our FaceBook page to show some love.  Who wouldn’t want an awesome channel strip plug-in for free?

Enjoy,

Wolf’s Den Music

Free Plug-in

Hey engineers and home studio enthusiasts,

For a limited time get your free Delay Plug-in

You’ll need this reference code, 218-6016-237, as well as a Soundtoys account and an iLok account. Here’s the link: https://www.soundtoys.com/sxsw2014/
Just go to the link, follow the directions and enter the code above, and you’ve got a free delay plug-in modeled after the classic Prime Time digital delay!
This is a free limited time offer from Soundtoys that we just wanted to make you aware of.

Let’s Talk About Music

Hey,
Musicians, Engineers and Music Fans.
Here is where You can enter the Wolf’s Den and become one of the pack by following our music blog.

We will be giving regular tips & advice on playing, recording, mixing, mastering, getting your music heard & finding music from other talented artists. We will post reviews on equipment and software and our experiences with them. We will also talk about instruments (vintage and new) Whats going on with artists we love and anything else in the world of Music.

We hope you’ll find this blog educational and fun!